Builds / Girl with a Pearl Earring / Build plan
Interactive build planGirl with a Pearl Earring: step by step
20 steps, 4137 bricks. Turn the model, step through every brick, tick off your progress, or print the PDF. The first 3 steps are free. The video and parts list always are.
Step 1 / 20
Drag to turn · scroll to zoom · ← → to step
You’re viewing the free first 3 steps. Parts list and video are always free.
Frame it
Finished size: 51.2 × 51.2 cm (64 studs × 8 mm). Recommended: a standard square 60 × 60 cm deep box frame (shadow box or float frame).
- Inner depth of about 3 cm or more. The plates and studs stand about 1 cm proud of the baseplate, so a flat picture frame will not close.
- The border gap (about 4.4 cm per side) looks like a mount. Centre the build in the frame. A 50 × 50 cm frame will not fit.
- The baseplate already acts as the back board. Fix it to the frame backing with strong double-sided foam tape, or small screws through the base corners.
- Roughly a couple of kg (estimate): hang it with proper wall fixings rated for the weight.
- Optional: put black card behind the picture so the black border reads cleanly through any gap.
- Keep it out of direct sun and dust it with a soft brush.
Find a 60 x 60 cm deep box frame (affiliate link)
Some links are affiliate links. They cost you nothing and help the channel. As an Amazon Associate I earn from qualifying purchases.
Full plan: £2.99 one-off, interactive plan and PDF included. Secure checkout by Stripe.